Airhoses

We can provide you with any length of airhose fitted with any type of connectors. Regardless of airbrushbrand and compressorconnection we can help you out.

Send us an e-mail with your request.

Below are listed some standard airhoses.

!
900103

Complete airhose 3 m for CONTROLLED AIRFLOW / ALL AIRBRUSHES

Ready to use airhose with NW 2.7 Controllable Quick coupling +NW 2.7 plug of your choice + NW 5.0 plug for Eurotec compressors.

The airflow is controllable between 0 and 100 % by means of the throttlevalve on the NW 2.7 Quick coupling. You will experience a whole new range of possibilities with your airbrush by adjusting the airflow.

When ordering choose the NW 2.7 plug that corresponds with your airbrush.

HSSLG-900102

Complete airhose 3 m for EVOLUTION, INFINITY, COLANI, GRAFO, HANSA

Ready to use airhose with NW 2.7 Quick coupling ( clicks onto NW 2.7 plug of Evolution, Grafo and Colani ) + NW 5.0 plug for Eurotec compressors.
ID-HSSLG-AZT

Complete airhose 3 m for AZTEK

Ready to use airhose with NW 2.7 Quick coupling +NW 2.7 plug for AZTEK + NW 5.0 plug for Eurotec compressors.
ID-HSSLG-BDG

Complete airhose 3 m for BADGER

Ready to use airhose with NW 2.7 Quick coupling +NW 2.7 plug for BADGER + NW 5.0 plug for Eurotec compressors.
ID-HSSLG-FB

Complete airhose 3 m for EFBE

Ready to use airhose with NW 2.7 Quick coupling +NW 2.7 plug for EFBE + NW 5.0 plug for Eurotec compressors.
ID-HSSLG-PA

Complete airhose 3 m for PAASCHE

Ready to use airhose with NW 2.7 Quick coupling +NW 2.7 plug for PAASCHE + NW 5.0 plug for Eurotec compressors.
ID-HSSLG-ORHI

Complete airhose 3 m for OLYMPOS, RICHPEN, HOLBEIN, IWATA, ULTRA

Ready to use airhose with NW 2.7 Quick coupling +NW 2.7 plug ( 1/8" ) for OLYMPOS, RICHPEN, HOLBEIN, IWATA, ULTRA + NW 5.0 plug for Eurotec compressors.
HSSLG-900104

Complete airhose 3 m with moisturetrap for EVOLUTION, COLANI, GRAFO

Ready to use airhose with NW 2.7 Quick coupling ( clicks onto NW 2.7 plug of Evolution, Grafo and Colani ) + NW 5.0 plug for Eurotec compressors. Equipped with drainable moisturetrap.
ID-HSSLGEXT

Airhose extension 3 m

Ready to use airhose-extension of 3 meter with NW 2.7 Quick coupling ( clicks onto NW 2.7 plug of the airbrush ) and into the NW 2.7 Quick Coupling of the 'Complete airhose' -type airbrushhoses.

This way the working radius of your airbrush can be extended from 3 to 6 meter.

HS-110273

110273 Harder & Steenbeck Airhose 1 m for Holder in Moduletechnology

1 Basic module requires 2 of these airhoses.

ID-PVC46

Airhose Clear PVC 4/6 mm per m

Inside diameter : 4 mm

Outside diameter : 6 mm.

HS-125883

Textile Airhose NW 2.7 Quick Coupling + 1/4 inch ID 2 m length

Fits - using appropriate reducers - to almost every airbrush : IWATA, OLYMPOS, EVOLUTION, HANSA, GRAFO, BADGER, RICHPEN...
HS-125893

Textile Airhose NW 2.7 Quick Coupling Controlable Airflow + 1/4 inch ID 2 m length

Fits - using appropriate plug for Quick Coupling - to almost every airbrush : IWATA, OLYMPOS, BADGER, RICHPEN... Connects directly to EVOLUTION, COLANI, INFINITY, GRAFO, HANSA as these airbrushes are already equipped with a plug for the NW 2.7 Quick Coupling.
HS-125963

Textile Airhose NW 2.7 Quick Coupling + NW 5.0 Plug 3 m length

Ready to use connection between Evolution, Silverline, Infinity, Grafo, Colani, Hansa airbrush and compressors type EUROTEC, SILAIR, HANSA.

AM-FLX1818-630556

Textile Airhose with Moisturetrap 1/8 inch ID + 1/8 inch ID 3 m length

Moisturetrap can be drained by removing a screwed plug in the housing.