Airbrush Maintenance
!
AB-ODSET

Airbrush Maintenance Set

Normal price : 42,80 Euro.

Promotional price : 41,50 Euro.

Airbrush maintenance-set consisting of :

Nozzle scraper

Screwdriver tool to replace needlejoint O-rings inside airbrushbody.

Just-a-Dab cleaning swabs FINE + MEDIUM

Airbrush cleaner Dr Ph Martin's.

 

HS-270020

Sparmax Cleaning Station

Handy to clean airbrushes.
The built-in filter separates the pigment from the cleaning agent which is collected in the bottompart of the pot.
Holds airbrush in the cleaningstation.

Comes in a plastic jar with lid.

HS_270010

Jellyfish Spare filterset

BA-JADMED

50-570 Just-a-Dab Cotton swabs Medium

Perfect to clean out every airbrush. Medium swabs have tip diameter of approx 1 mm

BA-JADFYN

50-580 Just-a-Dab Cotton swabs Fine

Perfect to clean out every airbrush. Fine swabs have tip diameter of approx 0,5 mm

300660

300660 Miniature Cleaning brushes for airbrush

3 miniature brushes to clean paintcups, airbrsh and nozzles.

300667
300667_borstelset

300667 Miniature cleaning brushes for airbrush / Set 5 pcs

Set of 5 miniature spiral cleaningbrushes for your airbrush : 1 x 2 mm / 1 x 3 mm / 1 x 4 mm / 1 x 5 mm / 1 x 10 mm.
HS-117403

117403 Harder & Steenbeck Nozzle Cleaning Device for Evolution / Grafo / Colani

Short scrapingneedle suited to scrape / remove dried-out paint out of the interior of the nozzle without damaging it. Suited for Evolution, Grafo , Focus and Colani.

HS-123933

123933 H&S Needlejoint replacement tool for Evolution , Evolution Silverline, Infinity and Grafo

This tool enables you to thighten or replace the needlejoint of the Evolution and Grafo airbrush..

300670

300670 Mini Airgun + 2 fine needles NW 2.7

Mini Airgun : suited to free any surface of dust, remainders of erasers ,scraping etc...and for drying or blowing out your airbrush ; to activate push the small button on the side.

Very fine outlet + 2 fine needles for multi purpose cleaning work.

Clicks into the NW 2.7 Quick Coupling that is fitted at the end of your airhose : unclick the airbrush, and replace it with the Mini Airgun.

128503

128503 Airblower Micro Air Blow Gun

Micro Air Blow Gun : ideal to remove dust / sanding dust / minuscule particles with exchangeable universal nozzle and air-needle 0.5 mm.

Max pressure 4 bar / 58 psi.

Equipped with NW 2.7 plug for Quick Coupling NW 2.7..

Connect to aircompressor Eurotec 20 A / 30 A / 50 A with airhose 900102.

 

AM-ABCLEAN-PM-118

Dr Ph. Martin's Spectralite Airbrush Cleaner 118 ml

To clean airbrushes after use of acrylics, ink, pigments, gouaches, tempera. Only for waterbased paints.
For oil-  and alkydpaints, clean with White Spirit.
HS-166081-266081

Dropflask 30 ml with mixing / shuttle 'stone' for airbrush paint.

For Harder&Steenbeck : Fits to the Evolution-X and INFINITY X airbrush (partnumber 166081 ) using the adaptor 118623-218623.

For Hansa : Fits to the Hansa 681 (partnumber 266081) using adaptor 118623-218623.

Note : Adaptor Hansa 218623 and Harder&Steenbeck 118623 are identical.

Fits also - using the adaptor - to Badger, Iwata, Paasche ...

Same model and closingprinciple as the standard Createx, Golden flasks.

Shuttle / mixing stone guarantees perfect mixing.

Ideal to contain and store larger pre-mixed volumes of airbrushpaints.

ORINGSET-900100

Complete O-ring set Evolution, Evolution Silverline, Infinity, Grafo

Complete O-ringset for Evolution airbrush consisting of following items :

123180 (3st)  / 123190 / 123220v /123220 / 123240 / 123290 / 123340 / 123450 (3st)

ORINGSET-900101

COLANI complete O-ring set

Complete O-ringset for Colani airbrush consisting of following items :

124050 / 124210 / 124221 / 124290 / 124300 / 123220v / 123220 / 123190 / 123180 (3st) / 123340