Obeeliks E-Shop Belgium

Excellent airbrush for detailwork with paintcup of 1.0 cc.

Equipped with so called 'controlled dual action' AND Quick Fix needle-travellimiter to limit the maximum amount of paint.

Controlled Dual Action = when pulling the trigger : first AIR is opened , then PAINT starts + increases together with AIR by gradually pulling the trigger further backwards. This sytem prevents the creation of spatters when paintaddition is started to early with  a conventional 'dual action' ( so called independent dual action).

Excellent airbrush for fine work with 4 bajonet replaceable paintcups of 4 cc.connected to the sidefeedsystem. The sidefeedsystem is hinged an can be put in any position.

Controlled Dual Action + Quick Fix needle-travellimiter.

Can be equipped with needle/nozzlesets of 0.15 mm and 0.4 mm

Excellent airbrush for general purpose work with  2 solventresistent plastic paintglasses of 15 cc connected to the sidefeedsystem. Sidefeedsystem is hinged and can be put in any position.

Can be equipped with 0.15 and 0.20 mm needle/nozzleset.

Controlled Dual Action + Quick Fix needle-travellimiter.

Basic Module for 2 airbrushes type Evolution, Infinity, Grafo, Hansa, Badger, Richpen, Olympos, Iwata and other brands.

For Colani : insert 110251 required.

Connects to compressor with complete airbrushhose for Evolution, Grafo, Colani.

Each airbrush connects to the module holder with airhose 110273. Basic module requires 2 such hoses - one for each airbrush. This hose is to be screwed into underside of the module holder.

For more than 2 airbrushes : order extension module 110203 - provided with in insert that accepts Evolution, Grafo, Hansa and most other airbrushes.

Extension for one extra airbrush. Accepts all brands of airbrushes.

For Colani : insert 110251 required.

1 Basic module requires 2 of these airhoses.

I you wish to use the moduleholder with only 1 airbrush you can close-off the bottom opening in the holder for the second airhose with this screw.

To use with Colani insert 110251 is needed.

Handy to clean airbrushes.
The built-in filter separates the pigment from the cleaning agent which is collected in the bottompart of the pot.
Holds airbrush in the cleaningstation.

Comes in a plastic jar with lid.