Powered by 2 batteries 1.5 volts ( not included ).

Ideal for fine erasing work.

Perfect to clean out every airbrush. Medium swabs have tip diameter of approx 1 mm

Perfect to clean out every airbrush. Fine swabs have tip diameter of approx 0,5 mm

Mini Airgun : suited to free any surface of dust, remainders of erasers ,scraping etc...and for drying or blowing out your airbrush ; to activate push the small button on the side.

Very fine outlet + 2 fine needles for multi purpose cleaning work.

Clicks into the NW 2.7 Quick Coupling that is fitted at the end of your airhose : unclick the airbrush, and replace it with the Mini Airgun.

3 miniature brushes to clean paintcups, airbrsh and nozzles.

Short scrapingneedle suited to scrape / remove dried-out paint out of the interior of the nozzle without damaging it. Suited for Evolution, Grafo , Focus and Colani.

Nr	0	1
<-->	7	9.5
L	45	48

Dimensions in millimeter.

Shape : flat, pointed with slanting edge
Hairtype: Squirrel Kazan Petit Gris 100% Pure
Handle: short, lacquered .
Ferrule: flat, brass wire bound.
Technique : marbling, pinstriping.

Contains 20 sheets

12 velum 300 g/m² watercolourpaper with NOT (medium) surfacefinish.

Acidfree.

Glued on all four sides.

12 velum 300 g/m² watercolourpaper with NOT (medium) surfacefinish.

Acidfree.

Glued on all four sides.

Basic Module for 2 airbrushes type Evolution, Infinity, Grafo, Hansa, Badger, Richpen, Olympos, Iwata and other brands.

For Colani : insert 110251 required.

Connects to compressor with complete airbrushhose for Evolution, Grafo, Colani.

Each airbrush connects to the module holder with airhose 110273. Basic module requires 2 such hoses - one for each airbrush. This hose is to be screwed into underside of the module holder.

For more than 2 airbrushes : order extension module 110203 - provided with in insert that accepts Evolution, Grafo, Hansa and most other airbrushes.

Extension for one extra airbrush. Accepts all brands of airbrushes.

For Colani : insert 110251 required.

1 Basic module requires 2 of these airhoses.

I you wish to use the moduleholder with only 1 airbrush you can close-off the bottom opening in the holder for the second airhose with this screw.

Only for COLANI airbrush.

Transfer paper, greasefree.
Tra,sfeered lines can easily be removed with a rubber or by washing.
For repeated use.
Colours: Yellow : for use on metal / Bleu : good visibility on light coloured backgrounds, textile / White : good visibility on dark coloured backgrounds, textile. / Black ( for light surfaces ).

Transfer paper, greasefree.
Tra,sfeered lines can easily be removed with a rubber or by washing.
For repeated use.
Colours:

Yellow : for use on metal / Bleu : good visibility on light coloured backgrounds, textile / White : good visibility on dark coloured backgrounds, textile. / Black : for light surfaces.

One side : eraser, other side ; brush for wiping off.

Handy to clean airbrushes.
The built-in filter separates the pigment from the cleaning agent which is collected in the bottompart of the box.
Holds airbrush in the cleaningstation.

Lid can be used as separate airbrushholder.

Handy to clean airbrushes.
The built-in filter separates the pigment from the cleaning agent which is collected in the bottompart of the box.
Set of 4 spare filters can be ordered separately.

Spare filters for the Mist Box.

Translucent polyesterfoil : a must for the stencilmaker.

Excellent tear-resistance.

Can be cut out with the stencilburner or a scalpel.

Can be made self-adhesive using the Helmar Repositionable Glue Spray.

Stencils made of this material can be re-used several times and can be stored for later use.