Tapes, glues and tools for modelmaking

Sellotape Crêpe 19 mm

General purpose maskingtape, usefull for silkpainting.

ID-PLKBD-19
Weight: 0.10 kg

Helmar Repositionable Glue Spray 350 gr

Excellent gluespray for applying stencils to every kind of support.
Glue has to be applied one-sided (on the stencil only).
Can easily be removed and repositioned afterwards for several times.
When applied two-sided a permanent adhesion is obtained.
Ozone-friendly product.

HE-HERPOS
Weight: 0.55 kg

Kleen Edge Medium Tack Tape 25 mm wide

One of the best tapes to line of your paintwork.
Medium Tack . Can be removed very easily without damaging the surface and without leaving glue remains on the surface even after several weeks and after exposing it to higher temperatures and sunlight.

KE-MEDTACK-25
Weight: 0.22 kg

Createx Masking Film Mat Low Tack 30 cm x 4 m

CR-ABMASKFLM-30
Weight: 0.25 kg

Drawingpen 15 cm for all media in Stainless Steel

Large capacity.

To apply thin lines in any kind of paint onto painted surfaces.
Handy for details on murals and faux finishes.

D-TRKPEN-15
Weight: 0.03 kg

Dropflask for Gutta

To be used in combination with Gutta pen 0.3 to 0.7 mm.
Can be used to add minute quantities of diluent to paintmixtures.

ID-DRFL-20
Weight: 0.02 kg

Dosing pipet transparant 3 ml

For injecting and dosing of small volumes.

FE-PIPET
Weight: 0.01 kg

Combination Sponge set

Set of 3 different seasponges : one each of Silk (fine) , Wool and Yellow sponge.

Excellent for decorative techniques on walls.

RN-2093-SPSET
Weight: 0.10 kg

Seasponges for watercolour 6 - 7 cm 4 pcs

Small natural bleached seasponges of +- 6 cm diameter
Suited for watercoloureffects and decorative painting techniques.

ID-AQSP-MED4
Weight: 0.05 kg

Seasponge large

Bleached seasponge +- 15 cm diameter.
Excellent for decorative techniques on walls.

ID-NASP-GR
Weight: 0.08 kg

Colourshaper - Series 14400 / extra firm / black silicone / FLAT CHISEL

Nr

02

06

10

16

<-->

6

8

10

16

L

12

14

16

22

Dimensions in millimeter.

Shape : flat, square, sloped
Hairtype : Silicone ( black colour = hard )
Handle: short, wood,matt black
Ferrule: flat, nickelplated.
Technique : decorative painting, veining

COLSPR-14400
Weight: 0.05 kg

Click here for more product information

Colourshaper - Series 14300 / extra firm / black silicone / CUP CHISEL

Nr

02

06

10

16

<-->

4

8

11

15

L

10

14

26

28

Dimensions in millimeter.

Shape : cup, chisel
Hairtype : Silicone ( black colour = hard )
Handle: short, wood,matt black
Ferrule: flat, nickelplated.
Technique : decorative painting, trompe l'oeil, marble-imitations

COLSPR-14300
Weight: 0.05 kg

Click here for more product information

Colourshaper - Clayshaper Wide / Curved / Extra Firm / black silicone / Black Handle

Nr

1"

1.5"

2"

<-->

25

38

50

L

35

35

35

Shape : flat, square, slightly curved
Silicone (black colour = extra firm )
Handle : short, wood ,matt black
Ferrule: flat, nickelplated.
Technique : decorative techniques, trompe l'oeil

COLSPR-24210
Weight: 0.05 kg

Click here for more product information

Colourshaper Decorator / Firm / grey silicone / Red Handle

Nr

1"

1.5"

2"

<-->

25

38

50

L

35

35

35

Shape : flat, square, slightly curved, cut(s) in the middle
Silicone (grey colour = firm )
Handle : shrt, wood ,matt black
Ferrule: flat, nickelplated.
Technique : decorative techniques, trompe l'oeil

COLSPR-DEC-23300
Weight: 0.05 kg

Click here for more product information

Rubber comb three sided

Three sides have even teeth. (small / medium / large)

3HKKAM-P1802
Weight: 0.11 kg

Rubbercomb Duplex

For applying decorative combeffects in wet paint glazes.

VERLKAM-P1801
Weight: 0.12 kg

Mask Master

Handy tool to cut all kinds of maskingfilm without cutting through it or damaging the underlaying surface.

The knive rotates 360 degrees and its' depth can be controlled by turning the black knob on top of the tool.

So this is NOT a tool to cut circles but a tool to cut through maskingfilm following a drawing previously made on the maskingfilm with a pencil. Width : +- 3''

Spare blades ( set of 2 ) available as a separate article

MSKMSTR
Weight: 0.10 kg

Click here for more product information

Mask Master Spare blade set 2 pcs

MASKMSTR-RES
Weight: 0.50 kg

Scalpel cutter Excell

EX-SCALPEL
Weight: 0.05 kg

Scalpel / Spare blades for scalpel Excell / 5 pcs

EX-SCALRES-MES
Weight: 0.03 kg

Art Tech Stencil Cutter with very fine tip

220 V, 14 Watt ( with EURO plug ) with very fine cuttingpoint to cut PVC , polyester etc.. Very convenient to cut stencils for airbrush , decorative painting techniques and glass etching.
Spare tip availiable separately.

AN-SJBR-S483X35
Weight: 0.25 kg

Click here for more product information

Art Tech Stencil Cutter / Spare Tip

Spare Tip for the Art Tech Stencil burner.
Does not fit onto the former Air Nouveau Stencil Burner.

AN-SJBRTIP-81107U0
Weight: 0.03 kg

Polyesterfoil Translucent

Translucent polyesterfoil : a must for the stencilmaker.

Excellent tear-resistance.

Can be cut out with the stencilburner or a scalpel.

Can be made self-adhesive using the Helmar Repositionable Glue Spray.

Stencils made of this material can be re-used several times and can be stored for later use.

ID-POLFOL
Weight: 0.10 kg

Thin Acetatesheet A4 format / 10 sheets

Price : per 10 sheets.
Excellent for cutting stencil for airbrush, decorative painting techniques.

ID-MICA-A4
Weight: 0.03 kg

Olfa Circlecutter 1 to 15 cm / with 6 spare blades

Ideal for cutting-out circular shapes out of cardboard, paper, plasticfoil, masking film etc.. when airbrushing, stenciling, glass-etching.

HO-OL-343
Weight: 0.10 kg

Cuttingmat GREEN A4 format in selfrepairing soft plastic

Made from selfrepairing soft plastic. Colour : GREEN

HO-SNYMAT-A4
Weight: 0.25 kg

Cuttingmat GREEN A3 format in selfrepairing soft plastic

Made from selfrepairing soft plastic. colour : GREEN

HO-SNYMAT-A3
Weight: 0.50 kg

Cuttingmat TRANSPARANT A3 format in selfrepairing soft plastic

HO-SNYMAT-A3-TR
Weight: 0.50 kg

Cuttingmat BLACK A3 format in selfrepairing soft plastic