HANSA Spare Parts

All spare parts for Hansa airbrushes are available, even when not listed in this overview; send us an e-mail with your requirements.

Information on how to recognize nozzles / needles and nozzlecaps :

Harder & Steenbeck / Hansa identification

Hansa Assembly Drawing All Models

Hansa Nozzle 0,2 mm 181/281

HA-NOZ-218722
Weight: 0.01 kg

Hansa Threaded Nozzle 0,2 mm for 100/101/150/180/200/201/250/280

HA-NOZ-4125031
Weight: 0.01 kg

Hansa Nozzle 0,3 mm 381/351/451/481/681

HA-NOZ-218732
Weight: 0.01 kg

Hansa Threaded Nozzle 0,3 mm for 300/301/302/350/352/380/382

HA-NOZ-4125041
Weight: 0.01 kg

218794 Hansa Needlecap 281 /381 /352 chrome

HS218794
Weight: 0.01 kg

Hansa Needle 0.2 mm for airbrush 151/181/251/581

HA-NLD2-218820
Weight: 0.02 kg

Hansa Needle 0.2 mm for airbrush 100/101/150/180/200/201/250/280

HA-NLD1-4125001
Weight: 0.02 kg

Hansa Needle 0.3 mm for airbrush 300/301/302/350/352/380/382

HA-NLD3-4125011
Weight: 0.02 kg

Hansa Needle 0.3 mm for airbrush 351/381/451/481/681

HA-NLD3-218830
Weight: 0.02 kg

Hansa Needle 0.4 mm for airbrush 451

HA-NLD3-218840
Weight: 0.02 kg

223043 Hansa Nut for needle tensioning

HA-223043
Weight: 0.01 kg

218180 Hansa VITON O-ring for nozzle per 3 pcs

Uitvoering : zwart rubber

HA-218180
Weight: 0.01 kg

218373 Hansa 7 ml paintcup for 681

Paintcup for suctionfeedsystem Hansa 681

HA-218373
Weight: 0.05 kg

Dropflask 30 ml with mixing / shuttle 'stone' for airbrush paint.

For Harder&Steenbeck : Fits to the Evolution-X airbrush (partnumber 166081 ) using the adaptor 118623-218623.

For Hansa : Fits to the Hansa 681 (partnumber 266081) using adaptor 118623-218623.

Note : Adaptor Hansa 218623 and Harder&Steenbeck 118623 are identical.

Fits also - using the adaptor - to Badger, Iwata, Paasche ...

Same model and closingprinciple as the standard Createx, Golden flasks.

Shuttle / mixing stone guarantees perfect mixing.

Ideal to contain and store larger pre-mixed volumes of airbrushpaints.

HA-166081-266081
Weight: 0.03 kg

Click here for more product information

Adaptor for Dropflask 30 ml

For Harder&Steenbeck : Fits to the Evolution-X airbrush (as partnumber 118623-218623 ) using the dropflask 166081-266081.

For Hansa : Fits to the Hansa 681 (as partnumber 118623-218623 ) using the dropflask 166081-266081.

Note : Adaptor Hansa 218623 and Harder&Steenbeck 118623 are identical.

Fits also - using the dropflask - to Badger, Iwata, Paasche ...

HA-118623-218623
Weight: 0.07 kg

Click here for more product information

104063 H&S Plug for Quick coupling NW 2.7 + 1/8 inch ID

On one side : fits all airbrushes with 1/8"OD connection (Evolution, Iwata, Grafo, Richpen, Rich, Olympos, Hansa, Holbein ). Other side : fits into the Mini Quick Coupling NW 2.7, available with different outletsizes.

HS-104063
Weight: 0.02 kg

Complete airhose 3 m for CONTROLLED AIRFLOW / ALL AIRBRUSHES

Ready to use airhose with NW 2.7 Controllable Quick coupling +NW 2.7 plug of your choice + NW 5.0 plug for Eurotec compressors.

The airflow is controllable between 0 and 100 % by means of the throttlevalve on the NW 2.7 Quick coupling. You will experience a whole new range of possibilities with your airbrush by adjusting the airflow.

When ordering choose the NW 2.7 plug that corresponds with your airbrush.

ID-HSSLG-REG
Weight: 0.20 kg

Click here for more product information

Complete airhose 3 m for EVOLUTION, INFINITY, COLANI, GRAFO, HANSA

Ready to use airhose with NW 2.7 Quick coupling ( clicks onto NW 2.7 plug of Evolution, Grafo and Colani ) + NW 5.0 plug for Eurotec compressors.

ID-HSSLG
Weight: 0.20 kg

Click here for more product information