Epoxy Wood protector is a very fluid and thin epoxy resin with mixingratio 1:1 (volume).

Used on new or deteriorating wood that frequently gets in contact with water / moisture.
The thin epoxy - to be applied with a brush - impregnates the wood and polymerizes inside the wood where all woodcells will be encapsulated with epoxyresin .
Depending on the porosity of the wood the epoxyresin will be absorbed. Apply new coats - after drying of the previous one - until the absorption stops, depending on the degree of woodprotection that is required.
Following mixing of A and B the resin has a potlife of several hours at 20°C. Once applied on wood it will dry in 2 hours. Minimum applicationtemperature is 0ºC. 

The epoxy woodprotector doesn't have to be completely dry when you intend to apply further layers of epoxy woodfiller - it will guarantee a perfect adhesion.

When applying epoxy woodfiller on dried epoxy wood protector the surface has to be roughened / sanded first.

Before applying varnishes or lacquers the epoxy wood protector has to be completely dry ; depending on layerthickness 2 hours to 1 day at 20°C.

The epoxy woodprotection can also be used on non absorbing surfaces such as metals, and also on concrete floors and stone.